Jack Points for floor jack/jack stands
Anyone look into this yet? I don't even have a C7 yet and I want to know. Is the diff housing aluminum or steel? I've been told not to use the diff as a jacking position if aluminum, but I'm guessing the diff is acceptable for the rear since the car doesn't weigh much. :iono:
For jack stand positions, I'd use a set of "Jack Point Jack Stands" (look them up). |
Edit: I'm an idiot. I just realized the rear diff isn't even accessible. Anyway, I think I answered my own question. The front and rear cross members of the double wishbone seem sufficient for jacking. Key word is "seems". Just found out they're composite rather than steel or aluminum. They look sturdy though.
|
There are 6 recommended points for jacking up the Stingray according to the owner's manual. There are 2 under each side, located roughly near each end of the rocker panels. You can also use the center of the cast aluminum front and rear suspension cradles. Do NOT use the composite springs! Also, for the side locations, you'll definitely want to look under the car before setting the jack. If you get it in the wrong spot and try to lift the car, you can easily crack the rocker panels. Several companies also make jack "pucks" that lock into the jack holes in the frame, and create a spacer to protect the rockers (just like the C5 and C6 Corvette generations).
|
Quote:
|
Not to mention when the car is so new, too! FYI you can download a PDF file of the owner's manual for free from Chevrolet. Go to their website, click on the Ownership tab, then Manuals and Videos. You then enter the year and model, and a list of available documents comes up. I got the owner's manual several months before my Stingray!
|
Quote:
|
I've looked at those. They are rather small and made of hollow square aluminum tube, roughly an inch across. They are solidly bolted to the main frame, just like C5 &C6 Corvettes. However since they are such light material I strongly do NOT recommend using them as jacking points. They might be ok in a pinch, such as with the "bumper savers" but they have no capacity for holding the weight of the car for extended lengths of time. Play it safe - use only the factory recommended support locations.
|
Quote:
|
All times are GMT -5. The time now is 11:50 PM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.